Monarch Trailer Sketches

Wing cuff for the wingtips. Wheels are mounted on the bottom that are guided by rails on the bottom of the trailer. Oct 2000

this is Kevin Johnson sanding Jim Marske's trailer to make a plug for the new trailer production. We are using a poyester filler. Oct 2000

Here is Jerry Nolans basic frame for the Monarch Trailer to fit the monarch Trailer drawings. October 2000

These are my rough sketches:

More detailed ones to follow, the rough width inside is 7 ft across and the length syould be about 22 ft. I imagine making a 1x2 frame and covering it with fiberglass cloth and epoxy. A set of axles and a tongue may be better than a ultility trailer, available from Northern.

Oct 2001

OK the plug (jims old trailer) is inside. We have increased the height to accomodate a tray for the fuselage. This is going to be one large plug so we have decided to divide it into four parts that bolt together. The parts will be made a section at a time and will be bolted and then fiberglassed together. It is also possible to ship the parts disassembled.